Receive our weekly Newsletter and set tailored daily news alerts.
Scaling of production volume will see costs come down. Mineral Fiber Ceiling Board
Innovation in Textiles | Cambridge, United Kingdom
The aerogels market made a big leap forward with the success of their application in electric vehicle (EV) batteries during 2022, according to a new report from IDTechEx.
Historic growth has been steady for other applications, but with the growth fuelled by the EV market, there is the opportunity for several other applications to take advantage of the scaling of production volume. Whilst EVs may take the lion’s share of the aerogels market going forward, IDTechEx still predicts annual growth of 7.4% between 2022 and 2034 for other aerogel applications.
The primary benefit of aerogels is their excellent thermal insulation, which has seen them adopted as insulation in several markets. The largest portion of this has been in industrial applications, including refineries. Insulating a distillation tower with aerogels, for example, leads to greater energy efficiency by not losing as much heat to the surrounding atmosphere. The hydrophobicity of composite aerogel blankets can also help prevent corrosion. Aspen Aerogels has its products in use at most of the world’s largest oil producers, refiners, and petrochemical companies.
Another common application is insulating oil and gas pipelines – in addition to the advantages above, the low-density of aerogels presents significant advantages for subsea pipelines, meaning smaller boats can install the lines. An emerging way to apply aerogels to these lines is as coatings that can be sprayed or brushed onto the lines, allowing for easier application.
The use of aerogels in building and construction is a growing area and the main advantages here are acoustic insulation, moisture regulation and fire resistance. Payback time will depend greatly on the scenario, but for aerogels, this will typically be longer than incumbent insulation, given the higher upfront cost of aerogels. IDTechEx thinks there would be significant challenges in being a like-for-like replacement for incumbent low-cost insulating material. The real success will be in areas with strict regulation changes around fire retardance.
The major challenge aerogels have faced in adoption as insulation is the competition from incumbent materials with a much lower cost point. An argument can be made, however, for energy efficiency over the long term, which has been highlighted by rising energy costs in many parts of the world. Additionally, as aerogel manufacturers scale up to serve the EV market, and with some developing lower-cost production methods, the cost of aerogels could move nearer to incumbent materials, further aiding their adoption.
It isn’t just large-scale factories and refineries that need thermal insulation, however. Smartphones are becoming increasingly power-dense, and the inclusion of 5G mmWave antenna has presented some new challenges. The surface of a smartphone must not reach temperatures that could be harmful to users ,which means thermal throttling (reducing device performance) is necessary once temperatures rise. Due to the poor signal propagation with mmWave, these antenna are located near the surface of the device and can generate a fair amount of heat. WL Gore produces an aerogel insulation specific to this application, which thermally insulates the surface of the device from the antenna but also does not block the mmWave signal thanks to the material’s low dielectric constant. As devices continue to add more performance to a similar-sized package, this could provide a good opportunity for aerogel insulation.
The IDTechEx aerogels research report has identified over 20 different application markets that aerogels have been, or could be considered for use in. Some interesting areas include insulating windows with transparent aerogel insulation, insulating apparel like gloves and jackets, and cold chain packaging. There is also interest in cosmetics for removing oils from the skin and even in a medical setting for tissue or bone engineering. There are many others, and each of these will have its own challenges and levels of commercial success. Following further capacity expansions by suppliers and more market penetration in promising applications, aerogels could make their way into some of these less established markets.
IDTechEx has been studying the aerogel industry for many years, with technical experts conducting an extensive number of primary interviews and detailed assessments of tht industry. Its latest report, Aerogels 2024-2034: Technologies, Markets and Players, benchmarks aerogels against other fire protection materials for EV battery packs, along with the players, their revenue, capacity and market progress.
Aerogels a $2.6 billion market by 2034
Transforming old jeans into artificial cartilage
PrimaLoft brings aeronautical material to outerwear products
Business intelligence for the fibre, textiles and apparel industries: technologies, innovations, markets, investments, trade policy, sourcing, strategy...
This week's key stories, direct to your inbox. Be the first to know.
Ceramic Fiber Blanket © Copyright Innovation in Textiles. Innovation in Textiles is an online publication of Inside Textiles Ltd. PO Box 271, Nantwich, CW5 9BT United Kingdom Registered in England No 04687617